ワンクリックで100ドルの商品
月間セール&割引
配送料一律199円
ワンクリックで100ドルの商品
月間セール&割引
配送料一律199円
ワンクリックで100ドルの商品
月間セール&割引
配送料一律199円
ワンクリックで100ドルの商品
月間セール&割引
配送料一律199円
ワンクリックで100ドルの商品
月間セール&割引
配送料一律199円
ワンクリックで100ドルの商品
月間セール&割引
配送料一律199円
-
ビューティー&ヘルス
-
ファッション
-
スポーツ&エンターテインメント
ドロワーメニュー
-
電子機器・アクセサリー
-
コンピューター・オフィス用品・アクセサリー
-
ホーム&ガーデン
-
ビューティー&ヘルス
-
ペット用品
-
セキュリティ
-
自動車
-
ファッション
-
産業・科学
-
スポーツ&エンターテインメント
-
おもちゃ・子供・ベビー
セール中
あなたの限定ブラックフライデーセール!
すべての商品がさらに15%割引 — あなただけの特典です。
マキシマイズBF
あなたの限定ブラックフライデーセール!
あなたの所在地を選択してください
-
エボリューション本部
無料
通常24時間以内に受け取り可能です
アメリカ合衆国 ニューヨーク州 ニューヨーク 9番街75番地 10011
📞 (+1) 212-456-7890
🕐 月~金:午前8時30分~午後10時30分
土:午前8時30分~午後10時30分
日:休業 -
ダウンタウン支店
5ドル 当日受け取り
6時間以内に準備完了
アメリカ合衆国 ニューヨーク州 ニューヨーク 10007 ブロードウェイ240番地
📞 (+1) 212-987-6543
🕐 月~日:午前9時~午後9時 -
クイーンズサービスセンター
無料
翌営業日発送可能
89-10 クイーンズ・ブルバード、エルムハースト、NY 11373、アメリカ合衆国
📞 (+1) 917-555-3344
🕐 月~金:午前9時~午後8時
土:午前10時~午後6時
日:休業
小見出し
製品比較
製品比較グリッドを説明してください
|
__ __ |
|
|---|---|
| 説明 |
説明 - __ |
| 評価 |
評価 - __ |
| 販売者 |
販売者 - __ |
| 色 |
色 - __ |
|
|
商品を比較 ( / )
25001商品
25001商品
並べ替え:
- オススメ
- 関連性が最も高い
- ベストセラー
- アルファベット順, A-Z
- アルファベット順, Z-A
- 価格の安い順
- 価格の高い順
- 古い商品順
- 新着順
$2.22 USD
Notes:
1. There are MOS and other components on the board, which are easily damaged by soldering iron induction electricity or static electricity. Please make sure that the soldering iron used is grounded (and the ground wire of the power strip is connected). It is best to wear anti-static gloves when operating.
2. Be careful not to install the battery upside down, otherwise the board may burn.
3. Please choose a power supply with sufficient power. Only in this way can the board work properly.
4. The board power supply should not be higher than 5V.
5. Please do not modify the board without technical confirmation.
6. It is normal for the module to heat up when working at high power, just pay attention to fanning.
Product Introduction:
1. This product is suitable for power-off equipment without power outages. When there is power, use external power supply, and automatically switch to battery power supply seamlessly when there is a power outage.
2. If the USB interface is used for power supply, it is recommended to use the Type-c interface. Compared with the microUSB interface, the current that can pass is much larger, and the maximum current that can pass is 5A.
3. Suitable for routers, cameras, development boards and other devices, seamlessly switch to battery power when power is off, and keep the network connected when power is off.
4. Seamless switching between external power supply and battery dual power supply (no delay)
5. Uninterrupted power supply, automatic start when power is off, automatic charging when incoming call.
6. Output voltage 5V/9V/12V optional, other voltages can be customized.
7. Four practical functions: lithium battery charging, lithium battery protection, boost output, and UPS switching.
8. Two-color LED indicates charging status, the green light is always on when full, and charging stops automatically.
9. Type-C interface, large current.
10. Product size: 89 x 42mm
11. Weight: about 37g
Function description:
1. UPS function: When the power supply is powered, the power supply directly supplies power to the load through the boost circuit, and charges the lithium battery at the same time. Once the power supply is off, the battery path is automatically started to supply power to the load through the boost circuit.
2. Boost circuit: peak power up to 20W, rated power up to 15W, BOST boost circuit, built-in 12A high current MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V output.
(Load normal recommendation <15W. Output 5V: current 3A, output 9V: current 1.6A, output 12V: current 1.2A)
3. Lithium battery protection overcharge, over discharge, over temperature, over current protection (if short-circuited by mistake, it will enter the protection state and no output, and it will automatically activate and restore output when connected to 5V charging)
| Package Weight |
|
Receives in 8 days.
$10.20 USD
1. The magnetic car charger has two styles to choose from, the outlet style and the stick-on style, which are suitable for most cars, pickups, SUVs, and taxis, making it easier for you to charge your phone in the car.
2. The car charger uses a high-quality ball joint that can rotate 360 ??degrees and adjust to your comfortable position.
3. Just place your phone in the middle of the wireless charging automatic adsorption area with one hand to secure it and easily place and take it out.
4. Adopting a smart chip, the heat dissipation holes are distributed in a ring on the back to ensure the safety of fast charging.
5. Material: Aluminum Alloy
6. Input voltage: 5V 9V /12V DC +/-5% (QC2.0)
7. Charging current: 2A
8. Power: up to 15W compatible with 10W/7.5W/5W
| Package Weight |
|
Receives in 8 days.
$12.87 USD
1. Material: magnesium-aluminum alloy + ABS/PC
2. Input power: 9V/2A, 9/2A, 12V/1.5A
3. Output power: 15W, 10W, 7.5W automatic identification
4. Support: 4.7-6.8-inch mobile phones
5. 360-degree universal ball head can be adjusted flexibly and can be rotated and adjusted at will
6. Colorful voice-controlled lights, a visual feast with rhythmic music, creating an atmosphere
7. Upgraded intelligent control chip, built-in temperature control technology intelligent identification, multiple protections, safe and fast charging without damaging the machine
8. The hollow soft silicone pad on the inside of the clamp arm buffers the pressure, and the golden structure is firm, locking the mobile phone stably without abnormal noise
9. Size: 102x80x15mm
10. Weight: 120g
| Package Weight |
|
Receives in 8 days.
$20.04 USD
1. Input current: 1A-ЗА Max
2. Power supply: 27W Max (This data is the power supply to the machine, not the wireless charging power)
3. Wireless charging power: IOS7.5W, Android 15W
4. Wireless charging standard: QC, PD compatible
5. Interface type: TYPE-C interface
6. The internal semiconductor cooling chip and cooling fan make it possible to serve as both a wireless magnetic car charger and a mobile phone cooler
7. The charger has built-in RGB LED lights, and when the charger starts wireless charging, the lights will light up, and you can ensure that your phone and the cars magnetic charger are well connected through the lights
8. 15W fast magnetic charging, if your phone does not have a magnetic function, you can use it with a magnetic condom or magnetic ring
9. 360-degree rotation, one-handed operation, the powerful magnet will automatically align the charging coil and easily lock your phone in place
10. EC chip intelligent temperature control to prevent the phone from overheating and damaging the machine
11. Eagle beak hook clip, multiple stable locking compatible with various air outlets
12. Universal ball head adjustment connection, multiple bases can be matched, and any angle can be adjusted
13. Wireless charger + bracket length: 9cm
14. Wireless charger diameter: 6.5cm
15. Weight: 115g (with clamp)
| Package Weight |
|
Receives in 8 days.
$9.96 USD
1. Material: silicone
2. Input: 5V/2A, 9V/1.67A
3. Wireless power: 5W/7.5W/10W
4. Packing list: Car launch pad (with cable) x1, manual x1
5. Wireless distance: within 8mm
6. Size: about 18x9.5x2.5 cm
7. Weight: about 185 grams
Features:
1. Adopt WPC Qi standard wireless charging fast charging technology, compatible with 5W/ 7.5W/10W
2. Smartly detect the mobile phone and automatically match the charging mode
3. Multi-protection charging does not damage the machine, temperature protection, foreign body detection, power protection, short circuit protection, overvoltage protection, overcurrent protection, overcharge protection, anti-reverse protection
4. Adopt temperature protection measures, in case of high temperature of the charger, it will automatically switch to the intelligent protection state to avoid potential safety hazards
5. When the phone is fully charged, it will automatically switch to trickle protection mode to protect the safety of the phone battery
6. Can be used as a cradle, and cannot be charged wirelessly when the cradle is in use
| Package Weight |
|
Receives in 8 days.
$5.00 USD
1. Both horizontal and vertical screens can be charged, adapting to various usage scenarios
2. Sound cavity design makes the sound more three-dimensional
3. Large base, stable support and not easy to fall
4. Fast charging + automatic trickle mode, charging quickly without hurting the battery
5. The principle of triangular stability, click without shaking, and the support is stable
6. Support 4.5-11 inch mobile phone and tablet devices
parameter:
1. Material process: ABS+PC
2. Input voltage/current: DC5V/2A, DC9V/1.67A, DC12V/2A
3. Output power: 15W/10W/ 7.5W/ 5W automatic identification and charging
4. Charging power: 110K-205KHZ
5. Charging port: Type-C
6. Wireless charging induction distance: 0-8mm
7. Conversion efficiency: greater than or equal to 80%
8. Product size: 96.3mm x 88.2mm x 139.3mm
9. Product weight: 154.2g
10. Support protocol: Compliant with QI wireless charging protocol
Packing list: wireless charging stand host x 1/data cable x 1/instruction manual x 1
| General |
|
| Package Weight |
|
Receives in 8 days.
$15.39 USD
1. 360-degree rotation can be horizontal and vertical, multi-angle smooth and not stuck, easy to rotate without pressure
2. 15W fast charge, does not hurt the phone, strong suction can not be removed, universal center console air outlet
3. Pick and place with one hand, charge with one touch, put it on and automatically align with the induction area, and charge while navigating
4. Built-in 8 powerful magnets, cant be thrown away, easy to deal with complex vehicle conditions
5. Stable and not swaying, strong suction will not fall
6. One clip is tight, anti-olecranon design
7. Clip arm silicone pad to protect the phone
8. Using thick pure copper independent large coil, fast charging
9. The contact surface of the bracket adopts a soft rubber pad, which is non-slip and scratch-resistant and does not hurt the phone
10. Button induction, start the phone clip
11. Input: 5V/2A, 9V/1.67A, 12V/1.5A
12. Output power: 15W / 10W / 7.5W / 5W
13. Output interface: Type-c
14. Wireless charging induction distance: 0-8mm
15. Note: The product only contains the bracket, no other
16. Weight: about 173g
| Package Weight |
|
Receives in 8 days.
$4.01 USD
1. Material: aluminum alloy + PC mirror material
2. Transmission distance: less than or equal to 8MM
3. Wireless charging standard: QI
4. Input interface: Android, Type-C
5. Input voltage/current: 12V/2A 9V/2A 5V/2A
6. Output power: 5W / 7.5W / 10W / 15W max
7. Working frequency: 110-205KHz
8. Product size: 100mm x 6MM
| General |
|
| Package Weight |
|
Receives in 8 days.
$4.85 USD
1. Material: ABS + electronic components
2. Use location: air outlet
3. Input power: 20W
4. Fast charging power: 15W
5. Three-axis positioning design allows the mobile phone to be accurately positioned at the charging position
6. Supports 15W MAX wireless charging, automatically matching the high and low voltage output of the mobile phone
7. Fast charging does not damage the phone, precious metal electroplated coils, improve charging speed
8. Optimized structure, no fear of any bumps, firmly adsorbed, easily cope with complex road conditions
9. 360 ball head angle, adjustable at will, adjust the angle according to driving habits, enjoy a comfortable use experience
10. Anti-fall design, rotating clamp nut reinforcement firmly locks the blades without shaking
11. Multiple safety protection, stable current, safe to use trickle charging protection, no damage to the battery
12. Compatible with 4.7-6.8-inch mobile phones, the clamp arm can be automatically adjusted, and charging with a case is not affected at all
13. Size: 12x12.5x12cm
| Package Weight |
|
Receives in 8 days.
$5.77 USD
2. Output power: Magnetic charging 25W, compatible with 15W/10W/7.5W/5W
Earphones: 3W
Watches: 3W
3. Conversion efficiency: Greater than 73%
4. Transmission distance: Charging distance <= 8mm
5. Product dimensions: 57 x 8.4 mm
| Package Weight |
|
Receives in 8 days.
$10.52 USD
1. The car wireless charger is designed for the space such as the car hand box and storage drawer, and the wireless charging can be directly upgraded without disassembling the car parts.
2. Using silicone material, soft, strong and sticky, the mobile phone is easily absorbed and sticky, shock-resistant and shock-resistant to ensure your driving safety
3. At the same time, you can also trim according to the size of the car space. Let you better experience the fun of wireless charging.
4. Wireless standard: QI standard
5. Input size: 5V/2A, 9V/1.67A
6. Wireless power: 5W/7.5W/10W/15W
7. Product size: 185×75×6mm
8. Product weight: 114g (net weight)
Package includes:
Car launch pad (with cable) x 1
Instruction manual x 1
| Package Weight |
|
Receives in 8 days.
$13.56 USD
1. Panel material: transparent tempered glass
2. Body material: ABS/PC+magnesium aluminum alloy
3. Implementation standard: GB 4943.1-2012
4. Input current/voltage: 5V/2A, 9V/1.67A
5. Wireless charging output power: 15W, 10W, 7.6W automatic identification
6. Charging power: 110K-206KHz
7. Wireless charging distance: 0-5mm
8. Built-in battery: 220mAh
9. Front light sensor: supported
10. Magnetic fast charging base: supported
11. Charging interface: TYPE-C
12. Overvoltage protection: supported
13. Applicable models: 4.7-7.2 inches
14. Output power: 15W, 10w, 7.5W automatic identification
15. 15W wireless charging, instant power recovery, QI charging protocol
16. The smart chip controls the temperature so it does not overheat, automatically identifies the model and matches the best charging power.
17. 360-degree adjustment, can be used in both horizontal and vertical screens
18. Touch sensor on the top of the back opens when touched in 0.1 seconds. Ultra-sensitive infrared sensor clamping arm automatically clamps the phone after it is placed firmly.
19. RGB colorful lights, gradient atmosphere lights, charging status, circular flowing water light effect, the faster the charging speed, the faster the flow rate will be.
20. Silicone protection, 3MM thickness silicone edging does not pinch mobile phone buttons
21. 66W magnetic fast charging, non-wireless charging can also meet all your needs
22. Product weight: 106g
23. Dimensions: 112.7x69x45mm
| Package Weight |
|
Receives in 8 days.
$5.28 USD
1. Thicken the copper core wire to increase the charging speed.
2. Adaptive smart chip. Full of automatic protection mobile phone, to prevent overvoltage and overcurrent, safety protection does not hurt the equipment.
3. Magnetic suction head, free of plugging and unplugging, prolongs the life of the interface.
4. Nylon weaving, not easy to break, no knots, no deformation.
5. Strong magnetic adsorption, not afraid of shaking.
Specification
1. Material: aluminum alloy/TPE/nylon braided
2. Power: 15W
3. Input interface: Type-C
4. Output interface: Micro USB
5. Transmission rate: 480Mbps
6. Cable length: 1m
| General |
|
| Package Weight |
|
Receives in 8 days.
$4.94 USDから
1. Material: ABS + electronic components
2. Applicable models: 4.7-7 inches
3. Bracket method: hook bracket base
4. Use position: air outlet
5. Power: 15W fast charging intelligent adjustment
6. Input power: 20W input
7. One-click width adjustment, easy to use with case, one-click adjustment button on the back, press to automatically unfold
8. Three-axis positioning design allows the phone to accurately locate the charging position, stable and firm, no fear of bumps and stable charging
9. Thickened silicone is soft, non-slip and more stable
10. 360-degree ball head angle can be adjusted at will, adjust the appropriate angle according to driving habits, and enjoy a comfortable use experience
11. Precise temperature control chip, multiple safety protection, stable current, safe to use trickle charging protection, no damage to the battery
12. 15W efficient charging, optimized internal coil structure, wire protection, reduce the interference of electric field on mobile phones, and improve charging efficiency by several levels
| Package Weight |
|
Receives in 8 days.
$2.81 USD
2) With high brightness, two LED lamps can make the magnifier clearer
3) Adopt handhold handle to conform to ergonomics design, ensure softer and more comfortable hand feeling
4) With arc shaped switch pushing board to conforms to finger shape
5) Apply to offices, hospitals, schools, instrument evaluation, printing, home living use
6) Diameter: 37mm
7) Powered by 3 x AAA batteries (Batteries not included)
8) Size: 130mm x 45mm x 22mm
9) Package Contents:
- 1 x Magnifier
- 1 x User Manual
| Package Weight |
|
Receives in 8 days.
2. 高い透過率で、水中でもより鮮明で明るい写真を撮影可能
3. 15倍マクロレンズ、被写体の拡大率を高め、植物や花、小さな昆虫の撮影に最適
4. スポーツカメラ愛好家のためのコンパクトで軽量、持ち運びに便利なアクセサリー
5. GoPro HERO10 Black / HERO9 Blackに対応
| 一般 |
|
| 梱包重量 |
|
Receives in 8 days.
$1.61 USD
1. Type: desktop magnifier
2. Material: ABS
3. Size: 32mm high, 27mm upper circle, 35mm lower circle
4. Magnification: 15X
5. Weight: 0.02kg
6. Packaging: carton
| Package Weight |
|
Receives in 8 days.
$2.32 USD
2. Thickened plate head design, firm and durable, strengthening bearing capacity.
3. Made of metal, durable and not easily deformed.
4. Widely used in supermarkets, clothing stores, jewelry stores and so on.
| Package Weight |
|
Receives in 8 days.
$9.35 USD
2. With 16+32 Pin gateway adapter, it won not need the password when adding new key.
3. Play and plug.
4. Made of good material, which is durable and reliable.
5. Note: If all keys lost, it will need password to program new key.
6. Fits for Nissan Sylphy, Sentra and the car with B18 chassis.
| General |
|
| Package Weight |
|
Receives in 8 days.
$4.97 USDから
1. Umbrella cloth material: bumper cloth
2. Umbrella handle material: alloy
3. Umbrella bone material: steel
4. Middle rod material: steel
5. Umbrella cloth over rubber: black rubber
6. Fabric density: 210T
7. Number of bones: 16 bones
8. Sun protection factor: UPF50+
9. Metal umbrella cap, extended design, rounded umbrella beads, integrated synthesis
10. Multi-process, sunny and rainy, waterproof outer layer, sun protection inner layer
11. Full shade high temperature resistant vinyl fabric, effective sun protection
12. High density large umbrella surface, effectively increase the area of rain and shade
13. Black painted steel umbrella frame design, strong and durable corrosion resistance, effective against high winds
14. Weight: about 460g
15. Size: unfolded about 105 x 86cm, folded about 86 x 5cm
| Package Weight |
|
Receives in 8 days.
$4.31 USD
1. Enlarge the umbrella surface to reinforce the rain, which can support 2 people
2. Log handle, comfortable grip, non-slip technology
3. High-density impact cloth, thick waterproof coating
4. Umbrella straps are strong and durable, finely handle the edges, and the texture is snapped
5. Umbrella pieces are tightly sewn with fine needles, and the top of the cap is compacted
6. Umbrella cloth density: 210T
7. Umbrella cloth material: impact cloth
8. Umbrella bone number: 16 bones
9. Open method: automatic
10. Umbrella collection method: manual
11. Umbrella bone material: fiber
12. Medium rod material: steel
13. Umbrella handle material: leather handle/wooden handle
14. Features: waterproof and thick umbrella surface, solid wood handle, reinforced treatment, effective windproof
15. Style: Long Handle Umbrella
16. Weight: 450g
| Package Weight |
|
Receives in 8 days.
$4.22 USD
1. Umbrella cloth material: bumper cloth
2. Umbrella cloth overgluing: vinyl
3. Umbrella fabric density: 190T
4. Bone material: steel pole + fiber
5. Center bar material: iron
6. Number of bones: 16
7. Umbrella bottom diameter: about 97cm
8. Weight: about 340g
Features:
1. One key to open and close, easy to use
2. Rain or shine, double effect, the outer layer of effective hydrophobic coating, the inner layer of vinyl effective UV blocking
3. 16-bone umbrella frame, strong windproof, can effectively withstand changing weather, anti-breakage, anti-rust, anti-deformation
4. High-density umbrella fabric + technology waterproof coating, effectively blocking rainwater
5. Fine umbrella fabric, more comfortable to touch, lightweight design, convenient for traveling
| Package Weight |
|
Receives in 8 days.
$3.55 USD
2. Easy to install, as simple as an umbrella
3. Precision mesh 2.8mm
| General |
|
| Package Weight |
|
Receives in 8 days.
$2.12 USD
2. Putting furniture sliders under the heavy furniture.
3. Perfect to easily move heavy furniture on carpeted surfaces.
4. Thickened, wear resistant, reduces scratches and noise.
5. Used for tables, recliners, dressers, sofas, heavy appliances, ect.
| Package Weight |
|
Receives in 8 days.
$4.21 USD
1. Material: PP
2. Suitable for kitchen storage, microwave heating, refrigerator freezing
3. Heat-resistant temperature: -20 degrees Celsius to 100 degrees Celsius
4. Each can be stacked to save storage space
5. Good sealing, not easy to leak
6. Intimate opening design, only need to open the lid when the microwave is heated
7. Size: 180ml 9x4cm; 190ml 11.5x7.5x4cm; 350mlx2; 650ml 11.5x4cm; 1170ml 12x13cm; 1900ml 12x16cm; 2060ml 23.5x15.8x8
8. Weight: about 935.3 grams
9. Packing list: 180mlx3; 190mlx3; 350mlx2; 650mlx2; 1170mlx2; 1900mlx2; 2060mlx2
| Package Weight |
|
Receives in 8 days.
2. Can store 16 TF cards
3. Small and lightweight, easy to carry
| General |
|
| Package Weight |
|
Receives in 8 days.
$2.77 USD
1. Small size and easy to carry, 16 functions in one package
2. Overall CR-V chrome vanadium steel forging, more durable wear-resistant, waterproof and rust-free
3. Split design, each can be used individually, 16 kinds of functions combined
4. Usage: twisting screws, measuring, repairing, opening bottles, etc.
5. Material: CR-V chrome vanadium steel.
6. Size: about 11 x 3.5 x 1cm
| Package Weight |
|
Receives in 8 days.
2. ピアノ平均律タッチバンド(赤) 長さ:112cm 幅:1.6cm~2.5cm 厚さ:0.3~0.5cm タッチバンドは主にピアノの平均律調律の基準群の調律に使用されます。基準音群の12音を一度に止めることができ、とても便利です。そのため平均律ストップバンドとも呼ばれ、基準群の平均律調整に使われる一般的なストップ工具です。ストップ部分がかなり長いため、アップライトピアノの中音域で同じ弦の左右の弦を一度に止めることができます。さらに、ピアノ基準群の調律ニーズを満たした後は、サブベースの調律ニーズにも対応可能です。
3. 青いチューニングフォーク:小型モデル:長さ9cm、幅1.2cm、厚さ1mm
4. 青いサイレンサー:ハンドル付き:全長24.5cm ゴム部分:長さ5cm、幅1cm、高さ1cm
5. A440HZ チューニングフォーク クロムメッキ鋼製 丸型チューニングフォーク。チューニングフォークは高精度で、音程変化が小さく、発音時間が長い機械的振動調律工具です
6. 青いサイレンサー:環境に優しいナイロン素材で、アップライトピアノの高音域の調律に使われるサイレンサー工具です
7. 工具バッグ外装 33x14.5x4cm
| 梱包重量 |
|
Receives in 8 days.
$20.28 USD
1. Material: steel
2. Weight: about 1450g/set
3. Size: about 220x110x50mm/set
4. Specifications: 3/32 (2 mm); 1/8 (3 mm); 5/32 (4 mm); 3/16 (4.5 mm); 7/32 (5.5 mm); 1/4 (6 mm) ); 9/32 (7mm)
5. Scope of application: construction and decoration workers, used for perforating thin iron plates, ceiling construction operations, etc.; used for perforated iron sheets, aluminum plates, stainless steel, brass, and other thin metal plates, and soft materials such as plastics, PVC, rubber, and leather
6. Features: various specifications, PVC dipped handles, comfortable grip, beautiful and practical, adjustable depth gauge, sturdy and durable, time-saving and labor-saving, simple operation, convenient use and wide applicability
| Package Weight |
|
Receives in 8 days.
$6.12 USD
1. Battery model: button battery CR2032
2. Flexible LCD has no light source, protecting children’s eye health
3. Anti-erasure lock to prevent accidental deletion and retain masterpieces
4. The battery has ultra-long standby time, low power consumption, and long battery life.
5. The rounded corner design does not hurt your hands and is comfortable to hold.
6. Integrated storage is convenient and simple
7. Size: 346mmx240mmx8.5mm
8. Weight: 303 grams
| Package Weight |
|
Receives in 8 days.
2130/25001を表示中
関連コレクションを探す
コレクションの説明
- 選択するとページが完全に更新されます。
- 新しいウィンドウで開きます。