特徴：
1. 高性能CCDまたはCMOSイメージセンサーを採用
2. 高解像度で鮮明な画像
3. 低照度、0ルクスIR対応の昼夜監視、24時間監視可能
4. 逆光補正対応、自動ホワイトバランス対応
5. 高SNR、画像がクリアで、自動デジタルシャッターをわずかにサポート
6. 自動デジタルゲイン対応
仕様：
1. センサー：1/3インチ カラーCCD
2. イメージデバイス：SN CCD
3. TVシステム：PAL/NTSC
4. スキャンシステム：2:1インターレース
5. 同期システム：内部
6. 照度：0ルクス（IRオン）
7. S/N比：48dB以上
8. ビデオ出力：1.0Vp-p、75Ωコンポジット、BNC x 1
9. ガンマ比率：0.45以上
10. 焦点距離：6mm固定レンズ
11. 視野角：垂直 92度 / 53度
12. ズーム比率：固定
13. 制御モード：固定
14. 昼夜切替：自動
15. 逆光補正：自動
16. ホワイトバランス：固定
17. ガンマ特性：0.15以上
18. 電子シャッター：PAL: 1/50～1/100,000秒、NTSC: 1/60～1/100,000秒
19. 赤外線LED：直径5mm、36個のIR LED
20. 赤外線距離：25メートル
21. 赤外線スペクトル：850nm
22. 動作温度：-10～+50度C
23. 保管温度：-40～+60度C
24. 入力電圧/電流：DC 12V/500mA
25. ケース素材：アルミニウム合金
26. カメラ寸法（ブラケットなし）：125(L) x 75(W) x 65(H) mm
27. 正味重量：360g

1. 優れた品質のアルミ合金を使用し、軽量ながら非常に高い強度のサポートを実現。
2. カメラの底部に取り付けたままにでき、三脚へのカメラの取り付けや取り外しを素早く簡単に行えます。
3. バッテリーコンパートメントの蓋の開閉やデータケーブルのハッチの開閉に影響しません。
4. ベースプレートには追加機能用の1/4インチ-20ネジ穴とストラップ穴が予備で設けられています。
5. 長さと幅がLプレートマウントに合うほとんどの一眼レフカメラに対応。

1. UTP CAT5ケーブルによる映像伝送。
2. 配線コストを10-20%節約。
3. 電源不要。
4. 最大CCTVビデオ動作距離: 600m

1. Material: PBT body, PC waterproof dust cover, nickel-plated copper connection terminal.
2. Input rated voltage: 32V
3. Input rated current: 100A
4. Output maximum current: 30A per circuit
5. Indicator function: When the red LED is lit, it means the fuse has been disconnected, you need to replace the fuse in time to continue running.
6. Fuse function: When the circuit malfunctions or is abnormal, the current is continuously increased, and the increased current may damage some important devices or valuable devices in the circuit, and may also burn the circuit or even cause a fire. The fuse protects the electronic device from overcurrent and also protects the electronic device from serious damage caused by internal faults. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly placed in the circuit, the fuse will cut off the current abnormally rises to a certain height and a certain temperature, thereby protecting the safe operation of the circuit.
7. Range of use: can be directly connected to the line of vehicle / ships free electrical appliances [such as: Car dome light, car headlights, sight wide light, fog lamp, warning lamp, vehicle refrigerator, car charger, car fan, car TV.
8. Product Advantage: The product adopts PBT anti-flame-resistance, high-low temperature and environmental protection materials, which fully meets [the fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not be broken during use. Conditions of deformation, combustion, short circuit, etc.

1. You have one stereophonic signal source (TV audio frequency, player, video game, mobile phone, PAD, computer, gramophone) want to output to other equipment at the same time (example the power amplifier, loudspeaker box or prepose amplifier)
2. This type product able to solve that 1 set stereophonic input able to distribute output 4 sets stereophonic,
3. Output has volume adjustment function, output without sound amplify function, the output keep the original tone quality and volume same with the input.
4. Input and output adopt standard RCA interface
5. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experience

Product Parameter
1. Material: Metal
2. Interface: RCA interface
3. Power supply: USB 5V supply power
4. Input and output impedance: 10K ohms - 50K ohms
5. Frequency responding: 20 - 20kHz.
6. Distortion: Less than 0.002%
7. Output consumption: Less than 0.01dB
8. Signal gain: 0dB
9. Signal-noise ratio S/N: Greater than 98dB
10. Input and output interface: Standard RCA interface
11. Input passageway: 1 set stereophonic input
12. Output passageway: 4 sets stereophonic output at the same time (4 sets output unified volume adjustment)
13. Single product net weight: 0.21kg
14. Product size: 95mm x 53mm x 38mm

Kit list
1. B063 1 in 4 out audio frequency signal distribute device RCA interface x 1
2. USB power supply wire (wire length 100cm) x 1

1. You have one stereophonic signal source (TV audio frequency, player, video game, mobile phone, PAD, computer, gramophone) want to output to other equipment at the same time (example the power amplifier, loudspeaker box or prepose amplifier)
2. This type product able to solve that 1 set stereophonic input able to distribute output 4 sets stereophonic,
3. Output has volume adjustment function, output without sound amplify function, the output keep the original tone quality and volume same with the input.
4. Input and output adopt 3.5mm earphone interface
5. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experience

Product Parameter
1. Material: metal
2. Interface: 3.5mm interface
3. Power supply: USB 5V supply power
4. Input and output impedance: 10KΩ - 50KΩ
5. Frequency responding: 20 - 20kHz.
6. Distortion: Less than 0.002%
7. Output consumption: Less than 0.01dB
8. Signal gain: 0dB
9. Signal-noise ratio S/N: Greater than 98dB
10. Input and output interface: Standard 3.5mm interface
11. Input passageway: 1 set stereophonic input
12. Output passageway: 4 sets stereophonic output at the same time (4 sets output unified volume adjustment)
13. Single product net weight: 0.15 kg
14. Product size: 87mm x 52mm x 22mm

Kit list
1. B064 1 in 4 out audio frequency signal distribute device 3.5mm interface x 1
2. USB power supply wire (wire length 100cm) x 1
3. 3.5 public to public wire (wire length 100cm) x 1

1. Material: PBT body, PC waterproof dust cover, nickel-plated copper connection terminal.
2. Input rated voltage: 32V
3. Input rated current: 100A
4. Output maximum current: 30A per circuit
5. Indicator function: When the red LED is lit, it means the fuse has been disconnected, you need to replace the fuse in time to continue running.
6. Fuse function: When the circuit malfunctions or is abnormal, the current is continuously increased, and the increased current may damage some important devices or valuable devices in the circuit, and may also burn the circuit or even cause a fire. The fuse protects the electronic device from overcurrent and also protects the electronic device from serious damage caused by internal faults. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly placed in the circuit, the fuse will cut off the current abnormally rises to a certain height and a certain temperature, thereby protecting the safe operation of the circuit.
7. Range of use: can be directly connected to the line of vehicle / ships free electrical appliances [such as: Car dome light, car headlights, sight wide light, fog lamp, warning lamp, vehicle refrigerator, car charger, car fan, car TV.
8. Product Advantage: The product adopts PBT anti-flame-resistance, high-low temperature and environmental protection materials, which fully meets [the fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not be broken during use. Conditions of deformation, combustion, short circuit, etc.

Product description:
1. Are you stuck with a set of power amplifier signals that need to be assigned to several speakers? Now this distribution panel can solve the problem of allocating one set of stereo inputs to four sets of speakers at the same time.
2. Number of speakers: we recommend you to use no more than 4 sets of speakers
3. Support power handling: rated power of each channel with amplifier up to 300W
4. Speaker wires: 2 or 4 wires, 16 AWG to 14 AWG
5. Easy to install: The input and output connectors can be wired, and the partition can be set. Compact design - Simple and compact design

Product parameters:
1. Material: Metal
2. Input: 1 set of input (banana plug)
3. Output: 4 sets of output (banana plug)
4. Power: Support 300W (The product requires no external power supply and is easy to install)
5. Net weight: 0.51 kg
6. Product weight after packaging: 0.56kg
7. Product size: length 245mm x width 65mm x height 51mm
8. Package size: length 250mm x width 73mm x height 60mm
9. Kit list: 1 in and 4 out Amplifier x 1

1. Eco-friendly ABS plastic.
2. 1 male to 2 females.
3. Mix music by connecting multiple music players at once.
4. Connect up to two headphones to one device for sharing music with friends.
5. 3.5mm headphone adapter splits line into two 3.5mm ports.
6. Applicable in Apple iPad / iPhone / iPod / Samsung / HTC / BlackBerry and other mobile phones with 3.5mm jack.
7. Also applicable in tablets, notebook computer, desktop computer, MP3 / MP4, etc.

1. Lightweight, allowing you to walk naturally and improve stability or reduce the risk of injury
2. A great way to keep your feet firmly planted on the ground in all weather conditions
3. They fit almost any type of footwear, from sneakers to work boots.
4. Ideal for winter outdoor sports enthusiasts, hunters, ice anglers, snowmobiles, etc. Gives you more confidence to walk, climb, ice fish on snow, ice or mud.
5. Material: stainless steel bottom plate + TPR strap
6. The tensile properties of the product elastomer are strong and the cold resistance is -35
7. Applicable size: M (35-40 size shoes), L (41-45 size shoes)
8. Weight: M size 326g/pair L size 355g/pair
9. Tooth height: 1.2cm

1. Lightweight, allowing you to walk naturally and improve stability or reduce the risk of injury
2. A great way to keep your feet firmly planted on the ground in all weather conditions
3. They fit almost any type of footwear, from sneakers to work boots.
4. Ideal for winter outdoor sports enthusiasts, hunters, ice anglers, snowmobiles, etc. Gives you more confidence to walk, climb, ice fish on snow, ice or mud.
5. Material: TPE silicone + 201 reinforced stainless steel chain + 201 reinforced stainless steel claw
6. The tensile properties of the product elastomer are strong and the cold resistance is -35
7. Applicable size: M 36-40, L 41-44, XL 44-47
8. Weight: M 395g, L 415g, XL 455g
9. Rubber size: M, 190 x 155 x 4.5mm, L, 210 x 160 x 5mm, XL, 230 x 175 x 6mm

Included accessories: each pair comes with a black storage bag + 2 sticky straps

1.Surface cotton flannel is three-dimensional, warm, soft and thick.
2.Bottom TPR material, possesses good elastic resilience and abrasion resistance.
3.Honeycomb design provides a stable structure, and dispersives thhe pressure to the bottom of the foot.
4.It can fit your shoes and heel.

1. Material: BK mesh, PU, TPU, GEL
2. Support the arch of the foot and relieve the pressure of walking
3. U-shaped heel cup to prevent sideslip during exercise
4. Soft and skin-friendly, breathable and comfortable
5. Suitable for people with foot problems
6. Size: XS:19.5x8.7cm, S:21x8.8cm, M:23x9.5cm, L:24x9.7cm, XL:25x10cm
7. Forefoot thickness: 0.3cm, arch height: 3.5cm

1. Made of high quality material, easy installation, strong and durable, long service life, can replace damaged or old busbars.
2. Install the screw holes under the cover for better protection.
3. Connection points: 4 M6 studs and 6 M4 screws
4. Metal material: nickel-plated copper
5. Voltage: 300V AC/48V DC max
6. Current: 130A AC/150A DC
7. Base material: flame retardant plastic
8. Center distance: 125mm
9. Screw hole distance: 4mm
10. Applicable scenarios: RV, yacht, solar line renovation

1. Main material: stainless steel
2. 106 all stainless steel, 107 copper tube + stainless steel panel
3. Features: connect the door frame and the door to change the medium, fixed the door
4. Uses: Suitable for all kinds of KTV box doors, door hidden doors
5. Built-in spring ball, the rebound is still strong

1. Material: plastic, copper
2. Weight: about 230g/piece
3. Size: about 9x9 cm/piece
4. Application: automobiles, motorcycles, ships, etc.
5. Power supply voltage: 12V
6. Power: 30W
7. Sound level: 110db
8. Current: 2A
9. Features: beautiful appearance, loud and clear sound, waterproof and rustproof, wide applicability, simple installation, durable

1. It is suitable for 1156 / BA15S bulbs installation.
2. Please check the bulbs model of your car before purchasing.
3. Why need this adapter? Because the LED bulb can't be installed steady when you replace the origin car bulbs, but our adapter is design for solving this problem.

1. It is suitable for 1157 / BAY15D bulbs installation.
2. Please check the bulbs model of your car before purchasing.
3. Why need this adapter? Because the LED bulb can't be installed steady when you replace the origin car bulbs, but our adapter is design for solving this problem.

1. Made of resin material, safe, environmentally friendly.
2. These resin dentures can be fixed and bite on your teeth by denture adhesive (Denture adhesive not included).
3. Ideal for Halloween party, create the infinite vital force for you, create a joyous, funny atmosphere.
4. Perfect for Halloween, April Fool Day, etc.
5. Crystal box packaging, easy to store and carry.

1. Prevents you from slipping while walking on muddy or snowy road
2. Single chain hooks with heat treatment, durable in use
3. Thickness of each tooth is 2cm, high hardness, good climbing and fixing ability, good for difficult road surface
4. Material: TPE soft rubber + 201 stainless steel
5. Rubber size:
- Size M, 190X155x4.5mm
- Size L, 210x160x5mm
- Size XL, 220x175x6mm
6. Applicable shoe size:
- Size M, 36-40
- Size L, 41-44
- Size XL+, 44-47

1. Material: stainless steel
2. Not easily oxidized and corrosion-resistant
3. Good quality and long service life
4. Simple product, easy to install and replace
5. Fits your watch and connects your watch strap well

Note: This product only has the strap connector and does not include other

1. 材質：亜鉛合金
2. 酸化しにくく、耐腐食性があります
3. 高品質で長寿命
4. シンプルな製品で、取り付けや交換が簡単です
5. 時計にフィットし、時計のストラップをしっかり接続します

注意: この製品にはストラップコネクターのみが含まれており、その他の部品は含まれていません

1. Anti-slippery: It helps you to hold the fishing rod firmly without Slip. It helps you to grip fish firmly without slip when you are removing the fishhooks.
2. Breathable: the use of comfortable, durable.
3. 3 fingers exposed design which can add flexibility for fishing, convenient and practical.
4. Adjustable hook and loop fastener wrist fastener.
5. Suitable for fisherman and fishing lover! And also suitable for cycling, climbing, photography, Hunting camping, etc outdoor activities.

Features
1. It uses 16 double-sided ZES-3570 lamp beads, which are 300% brighter than the original car halogen bulbs and have a stable light source.
2. Double-effect integrated heat dissipation, built-in heat dissipation system: equipped with a hydraulic fan, the speed can reach 15000rmp, fast heat dissipation, stable fan and long life.
3. The lamp body adopts a true 1:1 design with the original car halogen lamp, which is closer to the size of the original car halogen bulb, more convenient to install, plug and play, and no need to add other installation accessories. The surface of the lamp body is sandblasted to improve the mechanical performance of the lamp body, prevent rust and corrosion, and greatly increase the contact area between the lamp body and the outside world, accelerating the heat dissipation of the lamp body.
4. Thickened integrated aluminum substrate heat conduction: The lamp bead substrate is composed of an ultra-thick aluminum substrate, which has better heat conduction effect and achieves double-sided heat conduction effect. The substrate is closely combined with the aluminum lamp body and fully contacted, which can quickly and efficiently transfer the temperature of the lamp bead to the bottom fan, greatly improving the heat dissipation effect.
5. Constant current intelligent temperature control module: built-in temperature control intelligent drive, can identify the temperature of the lamp body, share the heat; avoid the risk of burning the lamp, reduce the temperature of the headlight, and extend the life. The use of high-power modules can better adapt to the changes in the instantaneous starting voltage of the car, completely isolate the interference of electromagnetic waves on the car audio and driving computer, making the headlight products more stable and more efficient.

Parameters
1. Lamp beads: 16 3570-55mil chips
2. Light type: spotlight
3. Color temperature: 6500K
4. Brightness: 3500LM
5. Power: 35W
6. Material: aviation aluminum alloy
7. Life: more than 50000H
8. Voltage: wide voltage 10-32V
9. Working temperature: low temperature -40~high temperature 85 degrees Celsius
9. Heat dissipation principle: aviation aluminum double copper substrate heat dissipation; hydraulic fan heat dissipation
10. Waterproof grade: IP68

1. Built-in battery: polymer lithium battery 150MAH
2. Charging method: Android charging port (Android USB cable) 20CM long
3. Material: Acrylic
4. Structure: light sensor + vibration sensor
5. Purpose: car cup tank atmosphere light & car interior atmosphere light & gifts & gifts & toys
6. Luminous mode: colorful mode/breathing mode/monochrome mode
7. Coaster size: 6.8CM in diameter
8. Weight: 0.08KG (1 set of 2)
9. Lighting conditions: 1. Use in a dim environment, 2. Vibrate to activate the light (35 seconds); two conditions are met at the same time to emit light